Aluminum Foil Sealing Machine For Automotive Battery, KAH-30
Aluminum Foil Sealing Machine For Automotive Battery
After air-leak test finished, the battery is conveyed to this Aluminum Foil Sealing Machine; then the machine will deliver the battery to the gate and enter into work area, and start to seal aluminum foil; after the sealing process is finished, the battery and the aluminum foil roll will move forward, meanwhile the next battery is delivered to work area and proceeding then the precious battery also starts to cut off aluminum foil; one cycle is done.
- This Aluminum Foil Sealing Machine is suitable for all types of automotive battery. (Recommendable) Aluminum Foil Width:
JIS type (12N24-NS60) --- 35mm
(N70-N200) --- 50mm
DIN type --- 65mm
- Cycle : 15-20 sec.
- Temperature range: 150～200
- The tooling surface adds heat-resistant rubber cushion, which can reduce the reject rate of rough vent hole.
- The preheating time : 10-15 Min.
- Electricity : 6KW, 1 or 3 phase, voltage and frequency to suit the customers specification.
- Air compress consumption : 39.6 nl/min at 5 kg/cm²
- Dimension : 2200(L)x1250(W)x1900(H)mm
- Weight (Approx.): 1300 KGS