Plastic Battery Casing | Made In Taiwan

KV-20(R)
Short Circuit Testing Machine For Automotive Battery
After finished the through the partition intercell welding, the battery will pass through this testing machine to check the following undesirable conditions:
* The lead was sprayed during the welding
* The lead scraps were dropped into the element group during the assembling.
* The separators are cracked or holed.
After the battery is completed the process of welding, the battery is delivered to this tester by conveyor and pass into the testing area, it is automatically located and stopped in the place. The test head will automatically lower to touch and electrify the bushings and intercells of battery for test, and then the test head will be raised automatically. If the above undesirable conditions are happened, this poor battery was pass to the end of machine and be rejected automatically. Upon completion of the short circuit test, the completed battery will be passed to the output conveyor.